C&C Lighting LumaPro Pinhole recessed LED downlight with a white trim, a small pinhole aperture and a finned heat sink housing

LumaPro Pinhole Recessed LED Downlight Series

The C&C LumaPro Pinhole Series is a high-power recessed LED downlight with a precision pinhole aperture that sets the light source deep inside the fixture. The result is a focused beam with minimal glare, a clean ceiling and light that lands exactly where it is needed. The discreet white trim and finned heat sink housing suit living spaces, kitchens, galleries, boutique hotels, restaurants and offices.

7W to 18W 4 cutout sizes 24° / 36° / 55° beams Ra90 0-10V dimming IC rated and airtight cETLus, damp location
Download Spec Sheet

Highlighted Features

Pinhole Design
A precision pinhole aperture recesses the light source for a focused beam and minimal glare.
Low-Profile White Trim
A clean white trim keeps the ceiling minimal and uncluttered.
Four Cutout Sizes
55mm, 65mm, 75mm and 95mm cutouts, from accent and artwork lighting to general illumination.
Wattage Range
7W, 10W, 12W and 15/18W for flexible light output across spaces.
High Color Rendering
Ra90 color rendering for accurate, true-to-life color.
0-10V Dimming
Smooth dimming for precise control of the light level.
IC Rated
Type IC rated, safe for direct contact with ceiling insulation.
Airtight
Helps reduce air leakage through the ceiling for better energy efficiency.
Damp Location Rated
Suitable for damp locations, including bathrooms and covered outdoor areas.
Finned Heat Sink
A finned housing dissipates heat for stable performance and a longer LED life.
Thermal Protection
An inherently protected design for safe operation.
Spring Clip Install
Spring clips give a quick, secure fit into the ceiling.

How to Order

Order by model code. Each code sets the size and the wattage. For example, C&C-LP-25C1047 is the 3" model at 12W. To receive a quotation, contact us at info@candclight.com with your project name, model codes, quantities and delivery location.

C&C-LP-25C1047

Model
Model, Size, Watt
LP-15C1047 2", 7W
LP-2C1047 2", 10W
LP-25C1047 3", 12W
LP-35C1047 3.5", 15/18W
Cutout
LP-15C1047 55mm (2 1/8")
LP-2C1047 65mm (2 5/8")
LP-25C1047 75mm (3")
LP-35C1047 95mm (3 3/4")
Beam Angle
24° Focused accent
36° General light
55° Wide coverage
Rating and Control
0-10V Dimming
IC Insulation contact
AT Airtight
cETLus Damp location

For full technical specifications and sizing diagrams, download the product spec sheet.

Download Spec Sheet

More About the LumaPro Pinhole Series

Specifications at a Glance

LP-15C1047 LP-2C1047 LP-25C1047 LP-35C1047
Size 2" 2" 3" 3.5"
Power 7W 10W 12W 15/18W
Cutout 55mm (2 1/8") 65mm (2 5/8") 75mm (3") 95mm (3 3/4")
Trim diameter 62mm (2.5") 75mm (3") 85mm (3 3/8") 105mm (4 1/8")
Height 59mm (2 3/8") 62mm (2.5") 64mm (2 5/8") 72mm (2 7/8")
Light source COB LED
Beam angle 24° / 36° / 55°
CRI Ra90
Efficacy 90 to 100 lm/W
Color temperature 3500K neutral white, with a 2700K to 6000K range listed on the sheet. Please confirm the color temperature when you order.
Input voltage 120V AC, 60Hz. The sheet also lists 100-130V, 100-277V and optional 100-347V. Please confirm the voltage for your project.
Dimming 0-10V
Lifespan 50,000 hours
Location rating Damp location
Insulation and air IC rated and airtight
Mounting Spring clips
Trim White
Housing Finned heat sink
Protection Inherently protected (thermal)
Certification cETLus
Design and Finish

The LumaPro Pinhole sets its COB LED deep behind a small round aperture, so the ceiling shows a crisp white trim and a single dark point instead of a wide lit opening. The effect is calm and architectural, and the source stays out of direct view.

Above the ceiling, a finned heat sink housing carries heat away from the LED for stable performance and a longer life. The trim is white, so it blends into most painted ceilings.

Optics, Color and Dimming

Three beam angles are listed: 24° for focused accent and artwork lighting, 36° for general light, and 55° for wider coverage. All models offer Ra90 color rendering and an efficacy of 90 to 100 lm/W, and are rated for 50,000 hours.

The features list a 3500K neutral white tone for a balanced, comfortable light, and the parameter table lists a 2700K to 6000K range. Please contact us to confirm the color temperature available for your order. Dimming is 0-10V, so use a compatible 0-10V control and confirm compatibility before ordering.

Installation, Insulation and Damp Locations

The LumaPro Pinhole installs with spring clips for a quick, secure fit. It is IC rated for direct contact with ceiling insulation and airtight to reduce air leakage through the ceiling. It is rated for damp locations, including bathrooms and covered outdoor areas.

Cutouts are 55mm, 65mm, 75mm and 95mm, and heights range from 59mm to 72mm, so please confirm ceiling cavity depth before cutting. Installation should be completed by a qualified electrician in accordance with local electrical codes.

Ratings and Certifications

The spec sheet states that the series is cETLus certified and carries marks for ETL (Intertek), ENERGY STAR, IC, FCC, dimmable, 90+ CRI, IC rated, airtight and wet location. Ratings can vary by model, so please contact us at info@candclight.com for the certificate and the exact rating of the model you plan to use.

Where to Use It
  • Living rooms and hallways: a clean ceiling with focused, low-glare light.
  • Kitchens: focused light over counters, islands and prep areas.
  • Bathrooms: damp location rated for bathrooms and covered areas.
  • Galleries and retail displays: focused beams for artwork and merchandise.
  • Boutique hotels and restaurants: a refined, discreet downlight over tables and corridors.
  • Offices: comfortable general light with minimal glare.
Frequently Asked Questions

What sizes does the LumaPro Pinhole come in?
2" (LP-15C1047, 7W), 2" (LP-2C1047, 10W), 3" (LP-25C1047, 12W) and 3.5" (LP-35C1047, 15/18W).

What cutout sizes do I need?
55mm, 65mm, 75mm and 95mm for the four models, in the order listed above.

What beam angles are available?
24°, 36° and 55°.

Is it dimmable?
Yes, with 0-10V dimming. Please confirm compatibility with your specific control.

Can I use it over insulation?
Yes. It is Type IC rated for direct contact with ceiling insulation and is airtight.

Can I use it in a bathroom or shower?
The fixture is rated for damp locations such as bathrooms and covered outdoor areas. Please contact us before specifying it for direct water exposure.

What color temperature and voltage does it use?
The sheet lists 3500K neutral white and 120V AC, 60Hz, along with a 2700K to 6000K range and 100-130V, 100-277V and optional 100-347V. Please contact us at info@candclight.com to confirm both for your project.