3 Meter 48V Mud-In Magnetic Track
The C&C 3 Meter 48V Mud-In Magnetic Track is a slim black track that sets into the ceiling plaster, so only a clean 33 mm slot shows once the ceiling is finished. Magnetic spotlights and linear fixtures snap on anywhere along it and can be moved or added later without tools. Each section is 3 m long, and straight connectors join sections for longer runs.
Highlighted Features
How to Order
The 3 Meter 48V Mud-In Magnetic Track is sold in 3 m sections and pairs with a C&C 48V magnetic track driver. To place an order, contact us at info@candclight.com with your project name, quantity and delivery location.
| 48V DC | Rated voltage |
| 20A | Rated current |
| 960W | Maximum load |
| 3 m | Per section |
| 118 in | Approximate |
| 33 mm | Slot width |
| 37 mm | Height |
| 57 mm | Overall width |
| Mud-in | Plaster-in mounting |
| Dry | Indoor location |
| ETL | Listed, cETL |
For full technical specifications and the profile drawing, download the product spec sheet.
Download Spec SheetMore About the 3 Meter 48V Mud-In Magnetic Track
Specifications at a Glance
| Model | C&C-PRO-0304-3M |
|---|---|
| Type | Mud-in (plaster-in) magnetic track |
| Length | 3 m per section (about 118 in) |
| Rated voltage | 48V DC |
| Rated current | 20A |
| Maximum load | 960W |
| Slot width | 33 mm |
| Profile height | 37 mm |
| Overall width (with flanges) | 57 mm |
| Ceiling thickness | 9 to 10 mm |
| Finish | Black |
| Location rating | Indoor, dry location |
| Certification | ETL listed (cETL, Intertek) |
Design and Finish
The track is built to disappear into the ceiling. Perforated flanges on both sides of the profile are buried in the plaster, which is skimmed and painted right up to the edge of the channel. What remains is a crisp black line, 33 mm wide, with the two power rails tucked inside.
Because the profile is black and recessed, the fixtures stand out and the track itself fades back. It suits kitchens, living areas, galleries and shops where a clean ceiling matters.
Installation
This is a mud-in track. It is fixed in the ceiling before the final plaster coat, with the flanges embedded in the plaster and the channel left open to the room. Plan the layout and power feed position before the ceiling is closed. The track is rated 20A at 48V DC, up to 960W, and needs a C&C 48V magnetic track driver sized for the connected load.
Straight connectors join 3 m sections for longer runs. Installation should be completed by a qualified electrician in accordance with local electrical codes. Please contact us for connectors, end caps, power feeds and drivers for your project.
Where to Use It
- Kitchens and living areas: a single flush line of adjustable spotlights over islands and seating.
- Hallways: a long, uninterrupted run with fixtures placed where they are needed.
- Galleries and showrooms: flexible accent lighting that can be repositioned as displays change.
- Retail: a clean ceiling with fixtures that move with the layout.
- Hospitality and offices: a refined, minimal lighting line for lobbies, restaurants and workspaces.
Frequently Asked Questions
What is a mud-in track?
A mud-in (plaster-in) track has flanges that are set into the ceiling plaster, so the track sits flush and only the slot shows.
How long is each section?
Each section is 3 m. Straight connectors join sections for longer runs.
What is the maximum load?
The track is rated 20A at 48V DC, up to 960W.
What driver do I need?
The track pairs with a C&C 48V magnetic track driver. Contact us at info@candclight.com and we will size one for your project.
Can I add or move fixtures later?
Yes. Magnetic fixtures snap on anywhere along the track and can be moved without tools.
Can it be used outdoors or in wet areas?
No. It is rated for indoor, dry locations.
无法加载取货地点可用性
