
VaporEdge Series LED Sauna Downlight
The C&C VaporEdge is a recessed LED downlight made for saunas and other warm, humid rooms. A slim white trim sits nearly flush with the ceiling, and a frosted lens spreads the light into a soft, even wash with little glare. It comes in 2, 3 and 4 inch sizes, with five selectable color temperatures from warm to cool white.
Highlighted Features
How to Order
VaporEdge is offered in three sizes. Choose the model for your size and output. The five color temperatures are selectable on the fixture. To place an order, contact us at info@candclight.com with your project name, model numbers, quantities and delivery location.
| C&C-3886 | 2", 5W |
| C&C-3887 | 3", 10W |
| C&C-3888 | 4", 15W |
| 120V | AC input |
| 60Hz | Frequency |
| 90°C | Min. supply conductors |
| 2700K | Warm white |
| 3000K | Soft white |
| 3500K | Neutral white |
| 4000K | Cool white |
| 5000K | Daylight |
| Type IC | Insulated ceilings |
| Damp | Location rating |
| ETL | Listed, cETL |
For full technical specifications and sizing diagrams, download the product spec sheet.
Download Spec SheetMore About the VaporEdge Series LED Sauna Downlight
Specifications at a Glance
| 2 Inch | 3 Inch | 4 Inch | |
|---|---|---|---|
| Model | C&C-3886 | C&C-3887 | C&C-3888 |
| Power | 5W | 10W | 15W |
| Trim diameter | 2.5" | 3.5" | 4" |
| Overall height | 2.5" | 3" | 3 3/4" |
| Type | Recessed LED downlight for saunas | ||
| Input voltage | 120V AC, 60Hz | ||
| Color temperature | 2700K / 3000K / 3500K / 4000K / 5000K (5CCT) | ||
| Lens | Frosted prismatic | ||
| Trim | White | ||
| Housing | Gray finned heat sink | ||
| IC rating | Type IC | ||
| Location rating | Damp locations | ||
| Supply conductors | 90°C minimum | ||
| Mounting | Covered ceiling, spring clips | ||
| Certification | ETL listed (UL 1598C, CSA C22.2 No. 250.0) | ||
Design and Finish
VaporEdge is built to sit quietly in the ceiling of a warm, humid room. The slim white trim reads as a clean ring against timber, tile or plaster, and the frosted prismatic lens glows softly without a bright point of light. A finned gray heat sink behind the trim carries heat away from the LED.
It is offered in three sizes with trim diameters of 2.5, 3.5 and 4 inches, so you can use small fixtures for accent lighting and larger fixtures for general light in the same room.
Color Temperature and Installation
Each fixture offers five color temperatures: 2700K, 3000K, 3500K, 4000K and 5000K. Use the warm end for a sauna and the cooler end for spa corridors and wellness suites. Input is 120V AC at 60Hz.
VaporEdge is Type IC rated for insulated ceilings and rated for damp locations. It mounts in a covered ceiling with spring clips and requires access above the ceiling. Supply conductors must be rated for 90°C minimum. Installation should be completed by a qualified electrician in accordance with local electrical codes. Please contact us for cutout sizes, lumen output and dimming compatibility for your project.
Where to Use It
- Saunas: soft, even light over the benches and walls.
- Spa rooms and wellness suites: a flush, low-glare fixture for treatment and relaxation spaces.
- Bathrooms: a damp-rated downlight for ceilings near showers and tubs.
- Locker rooms and change rooms: reliable light in humid spaces.
- Pool-side rooms: a clean, simple ceiling fixture for damp areas.
- Hotels and fitness clubs: a consistent fixture across spa and wellness areas.
Frequently Asked Questions
What sizes and wattages are available?
VaporEdge comes in 2 inch (5W, C&C-3886), 3 inch (10W, C&C-3887) and 4 inch (15W, C&C-3888).
What voltage does it use?
All sizes run on 120V AC at 60Hz.
What color temperatures are available?
Each fixture offers 2700K, 3000K, 3500K, 4000K and 5000K.
Can it go in an insulated ceiling?
Yes. VaporEdge is Type IC rated.
Is it rated for damp locations?
Yes. VaporEdge is rated for damp locations. Please contact us if your project needs a specific temperature or ingress rating.
Where can I find size details?
Download the spec sheet for the sizing diagrams, or contact us at info@candclight.com for cutout sizes for your project.
Couldn't load pickup availability
