C&C Lighting Quarry linear LED chandelier with two tiers of overlapping cream stone-look panels, brass dome studs and two brushed brass rods.

Quarry Stone-Look Linear LED Chandelier

The C&C Quarry is a long linear chandelier made of overlapping, irregular stone-look panels in two tiers, lit from within so each one glows a soft, warm cream. Two slim brass rods hold it level above a table, island or bar. A triac dimmable driver lets you bring the light from bright down to ambient.

46W 110-277V AC Triac dimmable Class 2 driver Stone-look panels 2-rod suspension ETL listed
Download Spec Sheet

Highlighted Features

Layered Stone-Look Panels
Two tiers of overlapping panels with natural, irregular edges.
Warm Inner Glow
Light passes through the panels for a soft, even, creamy glow.
Linear Form
A long rectangular body that suits dining tables, islands and bars.
Brass Rod Suspension
Two slim brushed brass rods hold the fixture level from the ceiling.
Integrated 46W LED
A built-in LED light source, with no bulbs to replace.
Triac Dimmable
A leading and trailing edge driver for smooth dimming on standard dimmers.
Class 2 Driver
A 24V DC Class 2 driver for safer low voltage output.
ETL Listed
Certified for North American safety standards (cETL, Intertek).

How to Order

The Quarry Stone-Look Linear LED Chandelier is a single ceiling-suspended fixture. To place an order, contact us at info@candclight.com with your project name, quantity and the drop length you need.

Quarry

Name
Electrical
46W Fixture power
110-277V AC input
50/60Hz Frequency
Driver
24V DC Output
2.5A Output current
60W Driver rating
Class 2 Power supply
Dimming
Triac Dimmable
Leading Edge
Trailing Edge
Mounting
Ceiling Suspended
2 rods Brushed brass
ETL Listed, cETL

For full technical specifications, download the product spec sheet.

Download Spec Sheet

More About the Quarry Stone-Look Linear LED Chandelier

Specifications at a Glance
Name Quarry
Type Linear LED chandelier
Power 46W
Input voltage 110-277V AC, 50/60Hz
Light source Integrated LED
Diffuser Layered stone-look panels
Finish Brushed brass
Driver Triac dimmable, 24V DC, 2.5A, 60W rated, Class 2
Dimming Triac, leading and trailing edge
Suspension Two brass rods to the ceiling
Mounting Ceiling, suspended
Certification ETL listed (cETL, Intertek)
Size Contact us for length, width and drop
Design and Finish

Quarry is made of overlapping panels with soft, uneven edges, each one fixed with a small brass stud. The panels stack in two tiers, so the fixture reads as one long, layered form that looks hand-cut and natural rather than machined.

When it is lit, the light passes through the panels and the whole fixture glows a warm cream. The brushed brass rods keep the line clean and let the panels stay the focus. It pairs easily with oak, plaster, linen and stone.

Driver and Installation

Quarry uses a Class 2 triac dimmable driver. Input accepts 110 to 277V AC at 50/60Hz, and the output is 24V DC at 2.5A. The driver dims on leading edge and trailing edge dimmers.

The fixture hangs from two brass rods fixed to the ceiling. Installation should be completed by a qualified electrician in accordance with local electrical codes. Please contact us for the length, width, weight, color temperature and drop length for your project.

Where to Use It
  • Dining rooms: a long run of warm light over a rectangular table.
  • Kitchen islands: a sculptural feature that matches the length of the island.
  • Bars and counters: a soft glow over a bar top or service counter.
  • Hotels and restaurants: a statement fixture for private dining rooms, lobbies and lounges.
  • Reception areas: a refined feature light over a desk or waiting area.
  • Entries and hallways: a warm, layered focal point in a long space.
Frequently Asked Questions

What voltage does Quarry use?
The driver accepts 110 to 277V AC at 50/60Hz and outputs 24V DC.

Is it dimmable?
Yes. The driver is triac dimmable and works with leading edge and trailing edge dimmers. Please contact us to confirm a compatible dimmer for your project.

What is the fixture wattage?
The fixture is 46W. The driver is rated for 60W.

Do I need to replace bulbs?
No. The LED light source is built in.

What finish are the rods?
The rods and fittings are brushed brass. Please contact us if you need other finishes.

Where can I find size details?
Please contact us at info@candclight.com and we will confirm the length, width, weight and drop length for your project.