C&C Lighting Eddy oval LED chandelier with a twisted, rippled clear ribbon, a warm glowing edge, two black clips and four thin black cords.

Eddy Twisted Ribbon Oval LED Chandelier

The C&C Eddy is an oval ribbon of clear, rippled material that twists over itself as it loops, like water curling around in a slow current. A fine line of warm light runs along its edges and catches the textured surface. Four thin black cords hold it level, and a triac dimmable driver lets you bring the glow from bright down to ambient.

46W 110-277V AC Triac dimmable Class 2 driver Twisted clear ribbon 4-cord suspension ETL listed
Download Spec Sheet

Highlighted Features

Twisted Ribbon Form
A single oval band that turns over itself for a flowing, sculptural shape.
Rippled Clear Texture
A textured, ice-like surface that breaks the light into soft sparkles.
Warm Edge Glow
Light runs along the ribbon's edges for a soft, even outline.
Black Clip Accents
Two slim black clips frame the ribbon and give the clear shape a clean anchor.
Four-Cord Suspension
Four thin black cords hold the fixture level from the ceiling.
Integrated 46W LED
A built-in LED light source, with no bulbs to replace.
Triac Dimmable
A leading and trailing edge driver for smooth dimming on standard dimmers.
ETL Listed
Certified for North American safety standards (cETL, Intertek).

How to Order

The Eddy Twisted Ribbon Oval LED Chandelier is a single ceiling-suspended fixture on four thin cords. To place an order, contact us at info@candclight.com with your project name, quantity and the drop length you need.

Eddy

Name
Electrical
46W Fixture power
110-277V AC input
50/60Hz Frequency
Driver
24V DC Output
2.5A Output current
60W Driver rating
Class 2 Power supply
Dimming
Triac Dimmable
Leading Edge
Trailing Edge
Mounting
Ceiling Suspended
4 cords Black
ETL Listed, cETL

For full technical specifications, download the product spec sheet.

Download Spec Sheet

More About the Eddy Twisted Ribbon Oval LED Chandelier

Specifications at a Glance
Name Eddy
Type Oval LED chandelier
Power 46W
Input voltage 110-277V AC, 50/60Hz
Light source Integrated LED
Diffuser Twisted, rippled clear ribbon
Accents 2 black clips
Driver Triac dimmable, 24V DC, 2.5A, 60W rated, Class 2
Dimming Triac, leading and trailing edge
Mounting Ceiling, four black suspension cords
Certification ETL listed (cETL, Intertek)
Size Contact us for length, width, ribbon height and drop
Design and Finish

Eddy is built from a single ribbon. The clear band loops into an oval and twists over itself, so the long sides rise and dip in a smooth wave. The surface is rippled and uneven, like hammered ice or running water, and a fine line of warm light along the edges makes the whole shape glow.

Two slim black clips and four thin black cords keep the look light and let the clear ribbon take center stage. It looks sculptural when lit and stays quiet when off. It pairs easily with travertine, light oak, plaster and dark metal.

Driver and Installation

Eddy uses a Class 2 triac dimmable driver. Input accepts 110 to 277V AC at 50/60Hz, and the output is 24V DC at 2.5A. The driver dims on leading edge and trailing edge dimmers.

The fixture hangs from four thin black cords fixed to the ceiling. Installation should be completed by a qualified electrician in accordance with local electrical codes. Please contact us for the length, width, ribbon height, weight, color temperature and drop for your project.

Where to Use It
  • Dining rooms: a flowing feature over an oval or rectangular table.
  • Kitchen islands: a light, sculptural piece that adds sparkle above the counter.
  • Entries and living spaces: a soft statement fixture that does not block the view.
  • Bars and lounges: a warm glow over a bar top or seating area.
  • Hotels and restaurants: a refined fixture for dining rooms, lobbies and lounges.
  • Showrooms and retail: a clean feature light over a display table or reception desk.
Frequently Asked Questions

What voltage does Eddy use?
The driver accepts 110 to 277V AC at 50/60Hz and outputs 24V DC.

Is it dimmable?
Yes. The driver is triac dimmable and works with leading edge and trailing edge dimmers. Please contact us to confirm a compatible dimmer for your project.

What is the fixture wattage?
The fixture is 46W. The driver is rated for 60W.

Do I need to replace bulbs?
No. The LED light source is built in.

How is it hung?
Four thin black cords hold the fixture level from the ceiling. Please contact us for the drop for your project.

Where can I find size details?
Please contact us at info@candclight.com and we will confirm the length, width, ribbon height, weight and drop for your project.